Voir les directives en français canadien

HOW TO USE:

FOR AREA LIGHT

Press 1 time for high
Press 2 times for medium
Press 3 times for low
Press and hold at any time for red flashing

FOR DIRECTIONAL LIGHT

PRESS 4 times for directional light

HOW TO CHARGE

Light may be used in low mode while charging (in or out) but charging time will be increased.
For best charging performance, charge (in or out) with the light turned off.

TO CHARGE LIGHT

Connect the provided USB cable to the light, then plug it into any USB charging port.

TO CHARGE DEVICE

Connect the device’s cable to the charging port, then plug in the device to start charging.

Charging Indicator

A charging indicator light is located near charging port and will illuminate when the USB charging has started.​
Red Flashing = Charging​ Light
Red = Charging Light Complete​
Green = Charging Device ”

LOW BATTERY INDICATOR

Area Light will flash red when battery is low

DESIGN FEATURES

STORAGE AREA

Suction cup, hook and charging cable can be stored in the designated storage area.
For optimal storing, place the suction cup in first (suction side down) and place hook around suction cup.
To access storage turn knob to the left to unlock. Pull to open.
To close storage, close door and turn knob to the right to lock

ATTACHMENTS

This light features two metal threaded areas compatible with standard tripod mounts.
Both the suction cup and hanger hook can be attached to either threaded area, offering versatile mounting options.

SUCTION CUP

Moisten the suction cup for better adhesion, especially on vertical surfaces.
Place the cup on the surface, press down, and tighten the knob.
Connect the light at the metal threaded area.
To remove the light, first release the suction by turning the knob counterclockwise.
Use the tab on the suction cup to help remove it.
Keep the suction cup clean for best performance.

HANGER HOOK

Attach the hook to a metal threaded area.
Twist the hook into the threaded area until it is securely fastened